/
Supported Parameters
Supported Parameters
- Matthew Webb
Owned by Matthew Webb
The following table is a list of supported parameters in the AutomateARC Driver:
| Command | Description | Read/Write |
|---|---|---|
| E | Motor Limit Setting | W |
| G | Speed | W |
| M | Motor Run Mode | W |
| P | Limit Position | W |
| S | Motor Speed | R |
| R | Reset To Factory Mode | W |
| V | Motor Voltage (Supported, but will display properly in future motor firmware update) | R |
, multiple selections available,
Related content
Supported Commands
Supported Commands
More like this
Initial Configuration
Initial Configuration
More like this
Device Discovery
Device Discovery
More like this
Overview
Overview
More like this
Driver Actions
Driver Actions
More like this
EV Station
EV Station
More like this