Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Current »

1.) Once you have the automateArc module installed into your Workbench, open the automateArc Palette.

2.) Select the "AutomateArcNetwork" and drag the network into the Nav pane under your Station → Drivers.


3.) Right click on the "AutomateArcNetwork" and select Views → AX Property Sheet.

4.) From the AX Property Sheet, expand the Serial Config and set the following parameters:

  • Port Name: COMx (Where x is your COM port that will be used for the AutomateArcNetwork)
  • Baud Rate: Baud9600
  • Data Bits: Data Bits8
  • Stop Bits: Stop Bit1
  • Parity: None
  • Flow Control: All items unchecked


  • No labels