nProtex is licensed by the number of connected stations.   If there is For one server (or web supsupervisor) and 10 JACE devices that would require 10 licensed stations.  The only station that needs a license file is the server.  Once the license file has been installed the subordinate JACE, a 10 station license is required. Following are steps for server licensing and station activation.  

Step 1. Install License (Automatic or Manual)

...

At this point your license file will be downloaded from Activelogix servers, copied into the appropriate directory, and loaded.

You should now be able to access nProtex through a browser at http://IP_of_host/nProtexnprotex.

Manual Installation

To manually install the license, copy the license file into the following folder:

...

Step 2. Tag Niagara Stations

Each subordinate station needs a simple "nprotex" tag to let nProtex know that it should be included in reports and licensed.  This tag can be of any type and the only requirement is that it is a property named "nprotex" underneath the Niagara Station.  The ProgramService can be used to batch add tags or it can be done manually by adding a slot.

Manual:

1. Navigate to the Niagara Network

2. View the Slot Sheet of the Station you'd like to license as one of the nProtex stations

3. Right Click > Add

4. Change the name to "nprotex" 

5. Type can be set to anything such as a baja String

6. Click OK.

This will add a new slot of the selected type to your Niagara Station.  Step 3 below will then activate this Station and all nProtex views will attempt to include it.

Step 3. Activate Subordinate Stations

The second third step activates all connected JACEs which prevents having to install individual license files per station.  To activate JACEs:

...

This will attempt to connect to all Stations that were tagged in (2) in the Niagara Network, look for Services/nProtexService and activate them.  Once activated, connected JACEs will be usable within Periscope nProtex as well as use the Firewall functionality.