The following table is a list of supported commands in the AutomateARC Driver:
| Command | Description | Read/Write |
|---|
| V | Query | R/W |
| G | Modify | W |
| T | Test | W |
| % | Read/Set Status | R/W |
| & | Pair | W |
| @ | Modify Address | W |
* | Module Reset | W |
| # | Unpair | W |
| $ | Delete Address | W |
| A | Feedback From Delete Address | R |
| Command | Description | Read/Write |
|---|
| b | Rotate Angle |
Bt | By Percentage | W |
| c | Close/Down or Jog Close/Down | W |
| f | Move to / Request Preferred Position | R/W |
| m | Move by Percentage | W |
| N | Request Name | R/W |
| o | Open/Up or Jog Open/Up | W |
| r | Request Position | R |
| s | Stop Movement | W |
| U | Undefined or Wrong Command | R |
| v | Request Version | R/W |