Periscope Prerequisites
- Periscope (versions 3.0+) must run on a Niagara4 station, version 4.0 or higher. It is recommended that Periscope run on a Niagara Web Supervisor or SoftJACE due to increased storage capacity and speed, but it can also run on any Niagara4 compatible JACE.
- Any station running Periscope must have at least 6MB available.
- Periscope is a web application and requires a modern browser. Officially supported browsers include IE10+ as well as the latest versions of Chrome and Firefox.
| Info |
|---|
Periscope will soon version 4.0 (Q3 2017) will support SkySpark in addition to Niagara4. |
...
Saving and stopping your station:
-
Open your Niagara Platform and
accessopen the Application Director
Save your running station (Save Bog)
- Stop the station (Stop)
| Info |
|---|
* The menu shown is located on the right side of the Application Director window |
...
Installing Periscope JAR file
- Using Windows Explorer, navigate to your current build of Niagara
- Typically: C:/Niagara/Niagara-4.X
- Place the periscope-rt.jar file in the modules folder under your Niagara build
- Place your Periscope license file in the licenses folder under your Niagara build
...
- Open Workbench, reopen your Platform and access the Application Director
- Start the station
- Open the periscope palette
- Drag and drop the PeriscopeService from the palette into your station's Services
- After which, Periscope installation will be complete and you may open Periscope by going to http:/(IP address of the Web Supervisor/JACE)/periscope
...